DANGER: Electrocution or injury could occur if the power cord encounters the sanding drum. Keep the cord clear of the sanding drum. Always lift the power cord over the machine.
DANGER: Electrocution or severe injury could occur if machine is connected to an electrical system that is not properly grounded. Do not remove or disable grounding pin.
DANGER: Electrocution could occur if maintenance or repairs are performed on a machine that has not been disconnected from the power source. Always unplug machine before servicing.
WARNING: Sanding dust can be airborne and can be breathed in while operating a sander. Always wear a dust mask while operating sanding equipment.
WARNING: Injury to the eyes and/or body can occur if protective clothing and/or equipment is not worn while sanding. Always wear safety goggles, protective clothing, and a dust mask while performing any sanding operation.
CAUTION: Maintenance and repairs performed by unauthorized personnel could result in damage or injury. Maintenance and repairs performed by unauthorized personnel will void your warranty. Servicing of this unit must always be referred to an authorized American Sanders Technology distributor.
CAUTION: Use of this machine to move other objects or to climb on could result in injury or damage. Do not use this machine as a step or furniture. Do not ride on this machine.
CAUTION: The machine is heavy. Use the proper lifting technique when transporting the machine. Get help to lift the machine.
CAUTION: Serious damage to the floor can occur if the machine is left running in one spot while the sanding drum is in contact with the floor. To avoid damage to the floor, feather cut in at a normal sanding rate. Do not dwell while lowering or raising the sanding drum. Always sand at a constant rate.
Page 4 | AMERICAN SANDERS TECHNOLOGY EZ - 8 Sander Operator's Manual |