![](/images/new-backgrounds/1258179/25817917x1.webp)
4.2
LTO MS1 SPEAKER MODELLER
-THE FRONT PANEL
R | SPEAKER MODELLER |
LTOMS1
CLIP
0dB
MIN MAX
GAIN
| JAZZ CLUB+SUB |
|
ACOUSTIC | VIRTUAL SUB |
|
ROCK & ROLL+SUB | STAGE MONITOR | POWER |
|
| |
LOUDNESS | JAZZ CLUB |
|
ARENA+SUB | CONCERT HALL+SUB |
|
CONCERT HALL | DISCO |
|
ANTIRUMBLE | VOCAL |
|
DRUM KICK | ROCK & ROLL |
|
FLAT
(1) | (2) | (3) | (4) |
1.Gain Control
This control adjusts the input gain by a range of
2.Clip LED
This LED lights up when the input signal is too strong. It warns that the output signal may cause distortion. Please attenuate the level of the input signal.
3.Presets Selector
Via this knob, you can select the right effect you wish to perform. There are total 16 options for you, JAZZ CLUB+SUB, WIRTUAL SUB, STAGE MONTOR, JAZZ CLUB, CONCERT HALL+SUB, DISCO, VOCAL, ROCK & ROLL, FLAT, DRUM KICK, ANTIRUMBLE, COBCERT, CONCERT HALL, ARENA+SUB, LOUDNESS, ROCK & ROLL+SUB, ACOUSTIC and JAZZ CLUB+SUB.
4. Power LED
This LED lights up when the unit is powered on.
-THE REAR PANEL
OUTPUT
TIP/PIN 2
RING/PIN 3
SLEEVE/PIN 1
15VAC~
INPUT
TIP/PIN 2
RING/PIN 3
SLEEVE/PIN 1
POWER | RIGHT | LEFT | RIGHT | LEFT(MONO) |
(5) | (6) | (7) |
5.AC Inlet
This jack is used to connect the AC power supply with the supplied 15V AC adapter.
6.Output Connector
This is a balanced 1/4" TRS jack, which is used to connect devices such as the effects returns on a mixing console or power amplifier inputs.
7. Input Connector
This is a balanced 1/4" TRS jack, which connects to sources such as the effect sends of mixing console.
8