Connecting the Mediamaster & First-time installation
About Smart card
The Mediamaster is equipped with a
Insert a valid smart card fully into the slot on the back of the Mediamaster. The gold chip must face downwards and inwards.
Connecting a Hi-fi system
It is possible to connect a TOS link cable from the Digital audio output on the Mediamaster to a
•Also use the TOS link Digital audio output for connection to an external Dolby digital/DTS decoder.
First-time installation general information
Once you have correctly connected the Mediamaster, you will also have to perform a
The ok button always confirms a selection within the menus, and pressing it will take you to the next step in the installation proce- dure. However, more than one value sometimes have to be entered in a menu. First, perform all necessary settings on the different lines. Then, confirm them all simultaneously by pressing ok.
•You can always return to the previous menu by pressing back.
•Use the cursor up/down button to move upwards and down- wards from one line to another.
•Use the cursor left/right button to change settings
You also use the number buttons on the remote control to enter numeric values.
GB 8