Connecting the Mediamaster
Common Connections
In this section, you will see some of the most common ways to connect your equipment.
If you have problems with your connections and need help, contact your retailer or Nokia Support.
Connecting to the TV with SCART
•Connect the antenna cable to the TV aerial input on the Media- master.
•Connect an RF cable from the TV/VCR output on the Mediamaster to the antenna input socket on the TV.
•Connect a SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster.
•Switch on your TV, then plug in and switch on your Mediamaster.
You may need to select the AV (SCART) channel on your TV to watch digital TV. In some cases, your TV will automatically select this channel when the Mediamaster is switched on.
NOTE: The RF lead will need to be connected in order to watch analogue channels (the old 1, 2, 3, 4, 5)
It is always advisable to consult the user guide that came with your TV.Connecting to the TV without SCART
•Remove the aerial lead from your TV and connect this to the TV aerial input socket on the Mediamaster.
•Connect an RF cable from the TV/VCR output on the Mediamaster to the RF input socket on the TV.
•Switch on your TV, plug in and switch on your Mediamaster.
•Select a programme number on the TV that is not currently used for other TV channels.
•Follow the instructions in your TV manual to tune the TV to the channel where you see the
•Follow the instructions in your TV manual to store this channel.
•When the
If the picture quality is bad, you can later change the
GB 6