See “Special Characters in Stored Numbers” on page 24 for details on storing pause and wait characters.

The following is an example of a number you could store in your phone:

This number contains a phone number (18005551212), a wait character, an access number (‘1234’), a wait charac- ter, and a password (‘3434’) - 18005551212w1234w3434.

When you recall this number from memory and press 6(1', the phone:

Dials 18005551212 (the stored number), then:

‘Waits’ for you to press 6(1' again. When you do, the phone sends the numbers 1234.

‘Waits’ for you to press 6(1' again, then sends the numbers 3434.

The following example shows storing ‘pause’ characters as well as ‘wait’ characters (Note that a ‘wait’ character must still be included, as shown, to separate the phone number from the following digits):

18005551212w1234p3434

When you recall this number from memory and press 6(1', the phone:

Dials 18005551212 (the stored number), then

‘Waits’ for you to press 6(1' again. When you do, the phone sends the numbers 1234. It then:

Pauses for 2.5 seconds, then sends the numbers 3434.

Note: If the keypad tones have been set to Off, the Touch Tones will still be sent, but you will not hear them.

57

Page 61
Image 61
Nokia 252 owner manual 18005551212w1234p3434