•RS-232 connector

1.Mount the Nokia 30 on the data adapter RS-232 first in order to connect the terminal with a compatible PC or other compatible devices.

2.Attach the data cable RS-232 to the adapter.

3.Connect the data cable from the terminal to a compatible PC or other compatible device. Use only the data cable RS-232 supplied by Nokia.

•Power connector

The Nokia 30 power connector is at the back end of the terminal, opposite the light indicators. When the Nokia 30 terminal is mounted on the RS- 232 adapter the power interface is found under the edge of the adapter.

-Connect the power cord from the power supply to the terminal.

-Connect the power supply to an AC wall outlet.

•External antenna connector

The external antenna connector is located next to the SIM card slot ( see picture on page 39). The external antenna can be used with the external antenna cable (XRM-1) accessory if the signal strength is insufficient.

-To connect the external antenna cable to the Nokia 30, cut off a piece of the SIM cover to fit the cable in.

-Connect an external antenna with the FME connector to the other end of the external antenna cable.

Copyright © 2002 Nokia. All rights reserved.

 

16

 

 

 

Getting started