Section 2: Understandi ng Your Phone
74 2I: Using Your Pho ne’s Voice Services
Voice-Activated Dialing
In addition to PCS Voice CommandSM (see page 93), you can use a voice
command that you set in your phone’s memory to automatically dial an
existing phone number in your Internal Phone Book.
To use voice-activated dialing, you must first assign a voice command to
the number you wish to call.
Assigning a Voice Command to a Phone Number
To assign a voice command (voice tag) to a phone number:
1. Press the down scroll key ( ) to display your current list of
Internal Phone Book entries.
2. Scroll to the entry to which you wish to assign a voice command and
press Details. The number associated to this entry is displayed.
3. Press Options, scroll to Add voice tag, and press Select.
4. Press Start, then speak the command clearly as though you were
speaking normally into the phone. The voice command indicator
( ) is dis played on your screen.
5. Press Options to assign other features to this entry, or press to
return to Standby mode.
Note: Be sure to record your voice command in a quiet environ ment and
without the aid of accessories (handsfree device) to avoid captu ring
unwanted sounds. Unwanted sounds may cause your phone not to recognize
your command when you attempt to use voice dialing.
Making a Call Using a Voice Command
To make a call using a voice command:
1. Press and hold Names for 2 seconds.“Please speak now” and the
voice command indicator ( ) are displayed on your s creen,
followed by a short tone.
2. Speak the voice command into your phone’s microphone as you
originally assigned it. When your phone recognizes the command, it
replays your command and automatically dials the number.
Sprint FM OUG NO BROWSER CTIA-3a.book Page 74 Wednesday, October 9, 2002 1:42 PM