
54 Copyright © 2004 Nokia. All rights reserved.
Advanced features
4Enter the number to which you want
your calls forwarded (or press Search
to recall a number from the phone
book), and press OK.
5Your phone calls the network to
activate (or cancel) the feature you’ve
requested. The network sends a
confirmation note when the feature
has been activated (or cancelled)
successfully.
• USE CALL WAITINGThis network service lets you receive an
incoming call when you’re already in a
call. When you receive an incoming call,
your phone displays the caller’s phone
number (or the caller’s entry in your
phone book). The phone also beeps,
notifying you of the incoming call.
Answering a waiting callPress the Send key (or press Answer) to
place the current active call on hold
automatically and answer the new call.
Switch between the two callsAccepting the waiting call puts the your
first caller on hold. To put the second
caller on hold and reconnect with the
first caller, press the Send key.
End the active callTo end the active call, simply allow the
other party to hang up; the call on hold
then becomes the active call. OR:
1Press the End key to terminate the
active call.
2The network redials your phone with
the call on hold. Answer this as you
would any normal incoming call.
• MAKE A CONFERENCE CALLThis feature allows you to talk to two
people at the same time. Conference
calling is a network-dependent feature.
Note: Check with your service
provider to make sure this service
is available in your network.
1Make a call to the first participant as
usual. When you’re ready to place a
call to the next party,
2Press Options, then press New call.
3Enter the number and press the Send
key (or press Search to recall the
number from the phone book).
4Press the Send key again to connect
both parties.
5To end the call, press the End key. This
action disconnects both parties.
End callsTo end a conference call (disconnect with
all callers), press the End key. Or you can
also press Options, then select End all
calls.
Disconnect second partyWhile all three parties are connected,
pressing the Send key disconnects the
second caller, keeping the first party’s
call active.
Disconnect first partyIf you wish to disconnect with the first
party and remain connected to the
second party, have the first party
terminate the call on his/her end.