●Homepage — Depending on the access point you are setting up, enter the web
address or the address of the multimedia message centre.
●Use access point — Select After confirmation if you wa nt th e devi ce to a sk fo r
confirmation before the connection using this access point is created, or
Automatically if you want the device to connect to the destination using this
access point automatically.
Select Options > Advanced settings and from the following:
●Network type — Select the internet protocol type to transfer data to and from
your device. The other settings depend on the selected network type.
●Phone IP address (for IPv4 only) — Enter the IP address of your device.
●DNS addresses — Enter the IP addresses of the primary and secondary DNS
servers, if required by your service provider. To obtain these addresses, contact
your internet service provider.
●Proxy server address — Enter the address of the proxy server.
●Proxy port number — Enter the port number of the proxy server.
Active data connections
Select Menu > Settings and Connectivity > Connection mgr..
In the active data connections view, you can see open data connections:
data calls
packet data connections
To end a connection, select Options > Disconnect.
To end all open connections, select Options > Disconnect all.
To view the details of a connection, select Options > Details.
Synchronisation
Select Menu > Settings and Connectivity > Data transfer > Sync.
Connectivity
© 2010 Nokia. All rights reserved. 97