89
Show my login status—Select whether your status is shown to others.

Connection settings

Contact your PTT service provider for the connection settings.
Log in to PTT
Select Menu> Settings > Connectivity > PTT. PTT automatically logs in to the
service when started.
When log in is successful, PTT automatically connects to channels that were
active when the application was last closed. If the connection is lost, the device
automatically tries to log back in until you exit PTT.
indicates a PTT connection.
indicates that PTT is set to do not disturb (DND).
Exit PTT
Select Menu> Settings > Connectivity > PTT> Options > Exit. Log out from PTT
after exiting application? is displayed. Select Yes to log out and close the service.
If you want to keep the application active in the background, select No.
Make a one-to-one call
Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
1. Select Menu > Settings > Connectivity > PTT > Options > Contacts, scroll to
the contact you want to talk to, and press the callkey.
2. When the connection has been established, to talk to the other participant,
press and hold the callkey while you talk.
3. To end the PTT call, select Disconnect, or if there are several PTT calls, select
Options> Disconnect.
Answer a PTT call
If Accepted list calls is set to Notify in User settings, a short tone notifies you of an
incoming call. To accept the call, select Accept. To silence the tone, select Silence.
To reject the call, press the endkey.