Nokia 5800 Q: What do I do if the memory is full?, Q: Why cant I select a contact for my message?, Q: How can I end the data connection when the device starts a data connection again and again?, Q: Can I use my Nokia device as a fax modem with a compatible PC?, Q: How do I calibrate the screen?

scanning for available networks. To further reduce battery

consumption, you can specify that your Nokia device does not

scan, or scans less often, for available networks in the

background. The WLAN turns off in between background

scans.

To change the background scan settings, do the following:

1. Select Menu > Settings and Wireless LAN.

2. To increase the background scan time interval, adjust the

time in Scan for networks. To stop background scans,

select Show WLAN availability > Never.

3. To save your changes, select Back.

When Show WLAN availability is set to Never, the WLAN

availability icon is not displayed in the home screen.

However, you can still manually scan for available WLAN

networks, and connect to WLAN networks as usual.

Q: What do I do if the memory is full?

A: Delete items from the memory. If Not enough memory

to perform operation. Delete some data first. or Memory

low. Delete some data from phone memory. is displayed

when you are deleting several items at the same time, delete

items one by one, beginning with the smallest items.

Q: Why can’t I select a contact for my message?

A: The contact card does not have a phone number, address,

or e-mail address. Select Menu > Contacts and the relevant

contact, and edit the contact card.

Q: How can I end the data connection when thedevice starts a data connection again and again?

A: The device may be trying to retrieve a multimedia message

from the multimedia message centre. To stop the device from

making a data connection, select Menu > Messaging and

Options > Settings > Multimedia message >

Multimedia retrieval. Select Manual to have the

multimedia messaging centre save messages to be retrieved

later, or Off to ignore all incoming multimedia messages. If

you select Manual, you receive a notification when you have

a new message in the multimedia message centre. If you

select Off, the device does not make any network connections

related to multimedia messaging. To set the device to use a

packet data connection only if you start an application or

action that needs it, select Menu > Settings and Admin.

settings > Packet data > Packet data connection >

When needed. If this does not help, switch the device off

and then on again.

Q: Can I use my Nokia device as a fax modem witha compatible PC?

A: You cannot use your device as a fax modem. However, with

call diverting (network service), you can divert incoming fax

calls to a fax number.

Q: How do I calibrate the screen?

A: The screen is calibrated at the factory. If it is necessary to

recalibrate the screen, select Menu > Settings and Phone >

Touch input > Touch screen calibration. Follow the

instructions.

Troubleshooting