71
Changing your security code
1. Press Menu 4-3-2-4 (Settings - Security settings -
Access codes - Change security code).
2. Enter security code and press OK.
3. Enter new security code at Enter new security
code:, press OK (must be five digits).
4. Enter new security code again at Verify new
security code:, press OK.
5. Phone will display Security code changed.
Send own caller ID with next call In most service areas, when you call someone, their caller
ID system allows them to see your name and phone
number. Your phone is set to automatically allow this
information to be seen. Before you make a call, you can
choose to prevent this information from being seen.
This is sometimes referred to as “blocking caller ID”.
Warning: While roaming, you may not be able to block
caller ID.
Note: Before you can activate this feature, you should
first store the feature code given to you by your
service provider. Otherwise, this feature may not
appear in the menu or function properly. Check with
your service provider to confirm if the feature code
has been pre-programmed for you. See “Network
feature setting” on page56 for more details.
This feature works on a per-call basis, so you must
perform this procedure before each call that you make in
order to block caller ID for that call.
1. Press Menu 4-4-4 (Settings - Network services -
Send own caller ID with next call).
2. Highlight Yes (to show your number) or No (to not
show it) and press OK.
3. Enter the number you wish to call (or press Search
to retrieve the number from the phone book), then
press OK. Press OK again.