Nokia 6235 manual Infrared activation, Voice commands, Receive a business card

S e t t i n g s

■Infrared activation

If supported by your wireless provider, you can send and receive contacts (business card) as a text message to a compatible phone or other handheld device using the infrared port. See ”Infrared” on page 62.

Send a business card

1.In the standby mode, select Menu > Settings > Infrared.

2.Highlight the entry from the contacts list that you wish to send.

3.Select Details > Options > Send bus. card > Via infrared > Default number to send primary number only or All details to send all contact information for the contact.

4.Align the IR port to the other activated device IR port. Select OK and your device will start sending the business card with IR.

Receive a business card

1.In the standby mode, select Menu > Settings > Infrared > Select. Infrared reception activated displays.

2.Align the IR port with the activated device port that is sending the business card.

3.Select Show > Save to save the business card in phone book memory, or select Exit > OK to discard the business card.

■Voice commands

You can dial up to 25 stored numbers using voice command dialling. See ”Voice tags” on page 35.

Before using voice tags, note that:

•Voice tags are not language-dependent. They are dependent on the speaker’s voice.

•You must say the name exactly as you said it when you recorded it.

•Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment.

•Very short names are not accepted. Use long names and avoid similar names for different numbers.

Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely upon voice dialling in all circumstances.

54 Copyright © 2005 Nokia. All rights reserved.