Nokia 6256 manual Remove the back cover, Remove the battery, UIM Cdma SIM card slot

Remove the back cover

1.With the back of the phone facing you, push down on the back cover.

2.Slide the back cover toward the bottom of the phone and remove.

Remove the battery

After you have removed the back cover, insert your finger into the finger grip, and lift the battery from its compartment.

UIM (CDMA SIM) card slot

Your phone has a UIM card slot built into

the mechanics. However, the UIM is not functional in this phone model. Avoid placing anything into the UIM card slot.

Install the MMC card

Before installing the MMC card, always make sure that the phone is switched off and that you have removed the cover and battery.

Open the MMC holder by lifting the latch(1) and lifting the holder up (2).

Insert the MMC card into the holder with the gold-colored contacts facing down, matching up with the gold- colored contacts on the phone. The beveled corner of the card fits into the beveled corner of the slot.

Close the UIM/MMC holder and replace the battery.

16 Copyright © 2004 Nokia