13
Get started
1. Connect the charger to a wall socket.
2. Open the cover on the top of the phone (1) and
connect the lead from the charger to the socket
(2).
If the battery is completely discharged, it may take
several minutes before the charging indicator
appears on the display or before any calls can be
made.
■CA-101 data cable
The CA-101 data cable is used for data transfer and slow charging the battery
while connected to a PC or laptop.
You must download Nokia PC Suite 6.83 to use with your phone. Updated versions
can be added after version 6.83. Go to www.nokia.com/support for more
information.
1. Connect the lead from the CA-101 to the micro USB socket on the top of your
phone.
2. Connect the CA-101 to your PC or laptop. Select USB mode: appears on the
display screen of your phone.
3. Select the mode you want.
The AC-6 charges the battery much faster than the CA-101. Charging with the
AC-6 is recommended when short charging times are needed.
■Switch the phone on and off
Warning: Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
Press and hold the power key as shown.
If the phone asks for a PIN or a UPIN code, enter the code
(for example, displayed as ****), and select OK.
When you switch on your phone for the first time, and the
phone is in the standby mode, you are asked to get the
configuration settings from your service provider (network
service). Confirm or decline the query. See Connect to
support, p.34, and “Configuration settings service,” p. 14.