Figure 4. Uncheck the Wait for Dial tone before dialling check box and tap Finish.

Figure 5. Now go to Dialling leaflet and go to Dialling Patterns…

Figure 6. In some cases you may need to edit these to get the phone number right when dialling.

Tip: If you wish to make a HSCSD connection then type the following dial-string in to the Extra dial-string… box:

Extra dial-string modem commands:

+cbst=16,0,1;+chsn=4,3,0,4 (to get 28.8 Kbps modem connection) +cbst=81,0,1;+chsn=6,3,0,8 (to get 38.4 Kbps ISDN v.110 connection) +cbst=50,0,1;+chsn=6,3,0,8 (to get 43.2 Kbps ISDN v.120 connection)

*If you wish to make a GPRS connection then put Access point name either to your phone or put the following AT command to Extra dial-string…box:

+cgdcont=,,"xxx" (NOTE! xxx refers to Access Point Name which you will get from your GSM operator)

2/4