
Before use
13
Eject the memory card1Open the door of the memory card
slot.
2Press the memory card to release
it from the slot (14).
3Remove the memory card. If the
device is switched on, press OK.
Do not open the memory card slot
door in the middle of an operation. This may damage the
memory card and the device, and data on the card may be
corrupted.
Charge the battery1Connect the charger
to a wall outlet.
2Connect the power
cord to the device
(15).
The battery indicator
bar starts scrolling.
The device can be used while charging. If the battery is
completely discharged, it may take a few minutes
before the charging indicator is shown.
3When the battery is fully charged, the bar stops
scrolling. Disconnect the charger, first from the device,
then from the wall outlet.
HeadsetConnect the headset
compatible with the
device to the Pop-
Port™ connector.
Warning: This headset may affect your ability
to hear sounds around you. Do not use this
headset in situations that may endanger your
safety.