6Getting Started

Nokia 730C

E
N
G
L
I
S
HInstallation is complete!
Enjoy your new 730C Monitor!
To be best prepared for any future
customer service needs:
• Write the serial number (see back
of the monitor) in

"For your Records"

on page 1 of this guide.
Quick Installation

1 Connect video cable

Make sure both the monitor and the
computer are powered OFF. Connect the
video cable to the computer.

Macintosh users:

Connect a Macintosh
adapter to the video cable, then to the
computer. For information about Mac
adapters contact your dealer. You will
need to provide your monitor's serial
number.

2 Connect power cord

Connect the power cord to a properly
grounded AC outlet, then to the monitor.

3 Power-ON monitor and computer

Power-ON the monitor, then power-ON
the computer. This sequence (monitor
before computer) is very important.
NOTE: At this point Windows®

98 users
may receive a message asking them to
install the 730C’s INF file.

4 Install INF and ICM files

•For CD-ROM: Insert the CD-ROM
into your system, wait for it to auto-
start, select “Monitor Drivers,” and
follow the on-screen instructions.
•For diskette: Insert the diskette into
your system, run setup.exe, and
follow the on-screen instructions.

5Windows users: Setting the

Timing Mode (resolution and refresh

rate)

Example: 1024x768@ 75Hz.

For instructions on changing the resolu-
tion and refresh rate, see the user guide
for your computer's graphics card.
6Use the OnView® controls to

adjust the screen image.

See the

Operations

section in this
guide.
Power Cords
Video Cable