Figure 4. Uncheck the Wait for Dial tone before dialing check box and tap Finish.

Figure 5. Now go to Dialing leaflet and go to Dialing Patterns…

Figure 6. In some cases you may need to edit these to get the phone number right when dialing.

Tip: If you wish to make a HSCSD connection then put the following dial-string in to the Extra dial-string… box:

Extra dial-string modem commands:

+cbst=0,0,1;+chsn=2,0,0,0 (to get the fastest available modem connection) +cbst=16,0,1;+chsn=2,0,0,0 (to get 28.8 Kbps modem connection)

*If you wish to make a GPRS connection then put following AT command to Extra dial-string…box:

+cgdcont=,,"xxx" (NOTE! xxx refers to Access Point Name which you will get from your GSM operator)

2/4