Messaging
44
E-mail message centres> Add centre — to set the phone numbers and
name of the e-mail centre for sending SMS e-mails
E-mail centre in use — to select the SMS e-mail message centre in use
Message validity — to select the length of time for which the network
attempts to deliver your message
Messages sent via — to select the format of the messages to be sent:
Text, Paging, or Fax (network service)
Use packet data> Yes — to set GPRS as the preferred SMS bearer
Character support> Full — to select all characters in the messages to be
sent as viewed. If you select Reduced, characters with accents and other
marks may be converted to other characters. When writing a message,
you can preview it to see how the message will look to the recipient. See
Write and send a SMS message p. 28.
Reply via same centre> Yes — to allow the recipi ent of your message to
send you a reply using your message centre (network service)
Multimedia messages
The message settings affect the sending, receiving, and viewing of
multimedia messages.
You may receive the configuration settings for multimedia messaging as
a configuration message. See Configuration settings service p.9. You
can also enter the settings manually. See Configuration p.65.
Select Menu> Messaging > Message settings > Multimedia messages
and from the following options:
Delivery reports> Yes — to ask the network to send delivery reports
about your messages (network service)
Image size (multimedia) — to set the image size in multimedia messages.
Before sending, images will be reduced to the selected size.
Default slide timing — to define the default time between slides in
multimedia messages
Allow multimedia recept. — to receive or block the multimedia message,
select Yes or No. If you select In home network, you cannot receive
multimedia messages when outside your home network. The default