Nokia 8800 manual Desk stand DT-19, CA-101 data cable, Switch the phone on and off

G e t s t a r t e d

Desk stand DT-19

The desk stand allows you to charge the phone battery with power supplied from the AC-6 charger or from your laptop when connected using the CA-101 data cable. The charge level of the phone battery is indicated on the display. The desk stand also allows data transfer.

CA-101 data cable

The CA-101 data cable is used for data transfer and slow charging the battery while connected to a PC or laptop.

You must download Nokia PC Suite to use with your phone. Updated versions can be added when available. Go to www.nokia-asia.com/8800arte/support for more information.

1Connect the lead from the CA-101 to the micro USB socket on the bottom of your phone.

2Connect the CA-101 to your PC or laptop. Select USB mode: appears on the display screen of your phone.

3Select the mode you want.

The AC-6 charges the battery much faster than the CA- 101. Charging with the AC-6 is recommended when short charging times are needed.

Switch the phone on and off

1Press and hold the power key as shown.

2If the phone asks for a PIN or a UPIN

code, enter the code (for example, displayed as ****), and select OK.

When you switch on your phone for the first time, and the phone is in the standby mode, you are asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See "Configuration" p. 36, and "Configuration settings service" p. 15.

Set the time, zone, and date

When you switch on your phone for the first time, and the phone is in the standby mode, you are asked to set the time and date. Fill in the fields, and select Save.

To access Date and time later, select Menu > Settings > Date and time > Date & time settings, Date and time format, or Auto-update of time (network service) to change the time, time zone, and date settings.

14

Copyright © 2008 Nokia. All rights reserved.