The Welcome Menu
To install the Mediamaster properly you have to adjust a few settings. You will always be guided by the information at the bottom of the menus. When you have finished the final part of the setup procedure you can start watching TV channels and listening to radio channels. Now you should have the Welcome Menu on the TV screen. Press the OK button to proceed.
Language Settings
Select the menu language that you desire. This will define the language shown in the menus. This will also be the main language for all the other parts such as audio and subtitling languages. Press OK to proceed.
Installation
In order to configure your equipment (satellite dish and LNB) you will need to use the following menus.
The LNB is the receiving unit, which is mounted on the satellite dish. For the following setup procedure you have to know the Local Oscillator (LO) frequency valid for your LNB(s).
Antenna Satellite Configuration
Highlight Antenna Satellite Configuration and press the OK button. You can configure the antenna for each satellite from this menu.
Antenna Alternative:
Select an Antenna alternative from 1 to 16 . Please note, that the parameters in the menu are
GB 11
