DHCP operation 41
The AP requests this parameter list by sending
a Vendor class identifier (DHCP option) with
the DHCPREQUEST/DISCOVER frames. This
will comprise the option code (60), length (10),
and the ASCII text “Nokia A03x”.
The AP does not expect to receive values for
every parameter in the table above; they are
subject to the same principle as standard
options (included if only if needed). In fact, the
total length of the option field is limited to 255
octets (and each option requires its length + 2
octets overhead), so including all of the options
runs the risk of overrunning the maximum size.
Some of the larger or more specialized AP
parameters are not supported via DHCP
options: if DHCP configuration is required for
them, the TFTP configuration file method must
be used.
Operational sequence on page 34 describes the
implications of not including certain options.
SNMP
community get
70 max. 16 “public” ASCII
SNMP
community set
71 max. 16 “private” ASCII
Parameter Option
code
Size
(octets)
Default
value Data