WARNING!
Do not use the Wireless LAN Adapter when the use of a wireless LAN terminal is prohibited or when it may cause interference or danger.
Use only the region setting appropriate for the area where the Wireless LAN Adapter is used at the present time. Using the Wireless LAN Adapter in any other region or with an incorrect region setting may be illegal.
Use only accessories approved by Nokia for use with this particular Wireless LAN Adapter. The use of any other types may invalidate any approval or warranty applying to the Wireless LAN Adapter, and may be dangerous.
For availability of approved accessories, please check with your dealer.
Install the Wireless LAN Adapter close to an accessible mains power outlet.
Avoid installing the Wireless LAN Adapter near sources of heat or in direct sunlight.
Disconnect the power before relocating the unit. You can only remove power to the Wireless LAN Adapter by physically removing the power adapter from the main outlet, or by removing the low voltage power jack from the rear of the unit.
Only use the power adapter that is supplied with the unit, or a manufacturer approved replacement. Use of any other adapter could be unsafe and cause damage to the Wireless LAN Adapter.
The Wireless LAN Adapter is classified as an SELV (Safety Extra Low Voltage) circuit according to European Standard EN 60950 (Safety of information technology equipment). For this classification to be maintained, equipment to which the unit is connected must also be classified as SELV.
Do not connect telephone equipment or wiring to the LAN port. This socket is only for use with RJ45 data connectors and the ISO/IEC
5