is on while charging. It may take a while before charging starts. If charging does not start, connect the charger again and retry.
Charging the battery fully may take up to 2 hours.
3.When the battery is fully charged, the red indicator light turns off. Disconnect the charger from the headset and the wall outlet.
The fully charged battery has power for up to 5 hours and 30 minutes of
When battery power is low, the headset sounds a series of beeps, and the red indicator light starts to flash.
Switch the headset on or off
To switch on, press and hold the power key until the green indicator light starts to flash.
To switch off, press and hold the power key until the red indicator light is displayed briefly.
Pair the headset
1.Switch on your phone and the headset.
2.Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices.
3.Select the headset from the list of found devices.
4.Enter the Bluetooth passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. You only need to pair the headset with your phone once.
5
