Install AA batteries
When you use batteries, alkaline batteries are recommended. To install the batteries, ensure that the speakers are off, and open the cover of the battery compartment by pushing the lower part of the cover and pulling the cover up.
Place the batteries as indicated in the compartment, and push the cover until it snaps into place.
During long periods where the speakers are not used, remove the batteries to prevent damage from battery leakage.
When battery power falls low, the red indicator light starts to flash and the speakers beep once a minute.
Connect to wall outlet
To use the speakers with the charger, connect the charger to a wall outlet, and plug the charger cable to the power connector.
If rechargeable batteries are placed in the battery compartment, they are not charged by the charger.
Switch the speakers on or off
To switch on, press and hold the power key until the blue indicator light is displayed.
To switch off, press and hold the power key until the red indicator light is displayed.
Connect the speakers
You can connect the speakers to a compatible device (such as a mobile phone or music player) using Bluetooth wireless technology or the supplied cable.
Pair and connect using Bluetooth wireless technology
The following instructions apply for a mobile phone but the procedure is the same for a music player, except that you may not need to give the Bluetooth passcode.
5
