ENGLISH
cable. To use a Bluetooth connection, the music device must support the A2DP Bluetooth profile.
Pair and connect using Bluetooth wireless technology
The following instructions apply for a mobile phone but the procedure is the same for a music player, except that you may not need to give the Bluetooth passcode.
1.Ensure that the speakers are off and that the phone is on.
2.Press and hold the power key until the white indicator light starts to flash.
3.Activate the Bluetooth feature on the phone, and set it to search for Bluetooth devices.
4.Select the speakers from the list of found devices.
5.Enter the Bluetooth passcode 0000 to pair and connect the
speakers to the phone. In some phones you may need to make the connection separately after pairing.
If the pairing is successful and the speakers are in a Bluetooth connection with the music device, the white indicator light flashes about every 4 seconds.
Connect using a cable
You can connect the speakers to a compatible device with the supplied
To connect the speakers to a device that has a standard 3.5 mm audio connector, plug the cable into the audio connector on the speakers and the other device.
When the speakers are connected to the other device using the cable, the white indicator is continuously on.