Copyright
©
2005 Nokia. All rights reserved.
Tools
111
Access point—The access point name is needed to use your
phone as a packet data modem to your computer.

Configurations

You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your SIM or USIM card. You
can save these settings to your phone, view or delete them
in Configurations.
Date and time
See "Clock settings", p. 15.
See also the language settings in "General", p. 106.
Security

Phone and SIM

PIN code request—When active, the code is requested
each time the phone is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards. See "Glossary of PIN and
lock codes", p. 112.
PIN code, PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. See "Glossary of PIN and
lock codes", p. 112.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialling of the emergency
number.
If you forget any of these codes, contact your service
provider.
Autolock period—You can set an autolock period, a
time-out after which the phone automatically locks and
can be used only if the correct lock code is entered. Enter
a number for the time-out in minutes, or select None to
turn off the autolock period.
To unlock the phone, enter the lock code.
When the device is locked, calls may be possible to the
official emergency number programmed into your device.
Tip! To lock the phone manually, press . A list of
commands opens. Select Lock phone.
Lock if SIM changed—You can set the phone to ask for the
lock code when an unknown SIM card is inserted into your
phone. The phone maintains a list of SIM cards that are
recognised as the owner’s cards.
Closed user group ( )—You can specify a group of
people to whom you can call and who can call you.