Copyright

©

2005 Nokia. All rights reserved.

Make calls
28

Make a call with a voice tag

Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should
not rely solely upon voice dialing in all
circumstances.
When you use voice dialling, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
1To start voice dialling, press and hold the capture key.
If you are using a compatible headset with the headset
key, press and hold the headset key to start voice
dialling.
2A short tone is played, and Speak now is displayed. Say
clearly the name or nickname that is saved on the
contact card.
3The device plays a synthesised voice tag for the
recognised contact in the selected device language,
and displays the name and number. After a timeout of
1.5 seconds, the device dials the number.
If the recognised contact was not correct, select Next
to view a list of other matches, or Quit to cancel voice
dialling.
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise
the device selects the first available number of the
following: Mobile, Mobile (home), Mobile (business),
Telephone, Tel. (home), and Tel. (business).
Video calls
When you make a video call, you can see a real-time,
two-way video between you and the recipient of the call.
The live video image, or the selected still image captured
by the camera in your device is shown to the video call
recipient.
To be able to make a video call, you must have a USIM card
and be in the coverage of a UMTS network. For availability
of and subscription to video call services, contact your
network operator or service provider. A video call can only
be made between two parties. The video call can be made
to a compatible mobile phone or an ISDN client. Video calls
cannot be made while there is another voice, video, or data
call active.
Warning! You cannot make emergency calls in the
Imaging mode because the keypad is not active. To
make an emergency call, activate the Fold open
mode.