Nokia Remote Camera 2. First start-up

First start-up

2. First start-up

1To remove the back cover of the camera, press the buttons on the

side (1) and slide the cover in the direction of the arrow (2).

Note: Before removing the cover, always switch off the power

and disconnect the power supply and any other device. Avoid

touching electronic components while changing the covers.

Always store and use the device with the covers attached.

Figure 2

2Open the battery lid, and release the SIM card holder.

Figure 3

3Insert your SIM card into the SIM card holder as shown in Figure 4.

Close the SIM card holder.

Keep all SIM cards out of the reach of small children. For availability

and information on using SIM card services, contact your SIM card

vendor. This may be the service provider, network operator, or other

vendor.

Contents

Main DECLARATION OF CONFORMITY Export Controls 3 Copyright 2005 Nokia. All rights reserved. For your safety 4Copyright 2005 Nokia. All rights reserved. Contents 5. Configure the settings...................................................................38 Page 1. Introduction About your camera Network services Battery information Batteries and power supply Charge and discharge Wet and damp conditions Sales package contents Camera features 2. First start-up Page Page Page Mount the camera Note on motion detection Coverage area in normal room temperature Mount the camera on a wall or ceiling Page Place the camera on a desk Switch off the camera Download Remote Camera Manager Nokia support on the Web 3. Basic use Capture images Page Call the camera Motion detection Page Page Motion detection settings Page Use motion detection with Remote Camera Manager Timed imaging Page Timed imaging settings Page Use timed imaging with Remote Camera Manager Thermometer Thermometer settings Use the thermometer with Remote Camera Manager 4. User settings Define the master user Add users Page User settings Page Define the user settings with Remote Camera Manager 5. Configure the settings Camera settings Image and video settings Page General camera settings Page Time and date settings Page Notification settings Security settings User authentication settings PIN code settings Connection settings MMS settings Access point settings Page Page Internet e-mail settings (SMTP) GSM network settings Configure the camera with a PC Establish a cable connection Establish a Bluetooth connection 6. Light indicators Start-up Battery status Signal strength status Camera status SIM card status 7. Enhancements 8. Care and maintenance 9. Additional safety information Operating environment Medical devices Pacemakers Hearing aids Vehicles Potentially explosive environments Page 10.Technical specifications 11.List of commands