16
7.Reference: Setting the Connection by Entering IP Address and Other Configurations
2Click [Network].
The Network configuration window will be displayed.
3Click [Location]→ “New Location...”, enter a new location name, and click the
[OK] button.
4Select “AirPort” in [Show].
•For wired LAN connection, click “Built-in Ethernet”.
SSID and WEP configurations are unnecessary for wired LAN.
5Click the [TCP/IP] tab.
6Select “Manually” in [Configure IPv4].
Entry fields for IP address, subnet mask and other configurations will be displayed.
7Enter the IP address and subnet mask appropriate for the projector LAN.
As an example, set the IP address “192.168.100.20” and subnet mask “255.255.255.0”.
8Click the [Apply Now] button.
Attempt to connect to the network set in [System Preference ...]→[Network]→[AirPort]
tab→[By default, join].
9Click the [ ] button at the upper left on the Network configuration window.
The Network configuration window will be closed.
9 Click
5 Click
4 Click
3 Click
6 Click
7 Enter
8 Click