USING OLYMPIC WEIGHTS ON THE LEG LEVER
To use Olympic weights on the Leg Lever (17), insert the Weight Adapter Bushings (24) into the ends of the Weight Adapter (32). Slide the Weight Adapter over the weight tube on the Leg Lever. Insert the Weight Adapter Pin (29) into the weight tube.
USING THE CURL PAD
To use the Curl Pad (8), unscrew the Adjustment Knob
(37)and lift the Leg Lever (17) out of the Bench Leg
(1).Insert the Curl Pad into the Bench Leg, and secure it with the Adjustment Knob.
Note: When not using the Curl Pad, store it away from the bench.
17 |
|
32 | 29 |
24 |
|
| 8 |
17 | 37 |
| |
| 1 |
Part |
| R1100A | |||
|
|
|
|
|
|
Key No. | Qty. | Description | Key No. | Qty. | Description |
1 | 1 | Bench Leg | 23 | 1 | Seat Mounting Bracket |
2 | 1 | Adjustable Bench Leg | 24 | 2 | Weight Adapter Bushing |
3 | 4 | 1/4” x 3/4” Screw | 25 | 6 | Foam Pad |
4 | 4 | 1/4” x 2” Screw | 26 | 6 | 3/4” Round Inner Cap |
5 | 1 | Bench Frame | 27 | 2 | Backrest Tube |
6 | 4 | 3/8” Washer | 28 | 6 | 1” x 1 1/2” Inner Cap |
7 | 1 | Bench Base | 29 | 1 | Weight Adapter Pin |
8 | 1 | Curl Pad | 30 | 9 | 1/4” Washer |
9 | 1 | Curl Upright | 31 | 6 | Pad Sleeves |
10 | 2 | 3” x 2” Outer Cap | 32 | 1 | Weight Adapter |
11 | 15 | 3/8” Nylon Locknut | 33 | 1 | 3/4” x 2” Inner Cap |
12 | 2 | 3/8” x 2 3/4” Button Head Bolt | 34 | 1 | 1/4” x 1 1/4” Screw |
13 | 1 | Stabilizer | 35 | 1 | Backrest Adjustment Bracket |
14 | 1 | Seat | 36 | 1 | Seat Adjustment Bracket |
15 | 1 | Backrest | 37 | 1 | Adjustment Knob |
16 | 3 | Pad Tube | 38 | 1 | 1” Angled Outer Cap |
17 | 1 | Leg Lever | 39 | 1 | 1” Round Inner Cap |
18 | 2 | Bench Joint Plate | 40 | 3 | 1 1/2” Square Inner Cap |
19 | 1 | Bench Base Joint Plate | 41 | 1 | 3/8” x 2 3/4” Bolt |
20 | 2 | 2” Square Outer Cap | # | 1 | Allen Wrench |
21 | 11 | 3/8” x 3” Bolt | # | 1 | User’s Manual |
22 | 2 | 3/8” x 7 1/2” Bolt | # | 1 | Exercise Chart |
Note: “#” indicates a
14
