5. With the help of a second person, carefully tip | 5 |
|
|
|
the treadmill onto its right side. Partially fold the | B |
|
| |
A |
|
| ||
Frame (56) so the treadmill is more stable; do |
|
| ||
|
|
| ||
not fully fold the Frame yet. |
|
|
|
|
Remove and discard the two indicated bolts (A) |
|
|
|
|
and the shipping bracket (B). |
| 83 |
| |
Attach a Base Pad (81) to the Base (83) in the | 81 |
| 56 |
|
|
|
|
| |
location shown with a 1" Tek Screw (2) and a |
|
|
| 4 |
Base Pad Spacer (13). Then, attach another | 2 |
|
| |
|
|
| ||
Base Pad (81) with only a 1" Tek Screw (2). |
|
|
|
|
Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4), |
| 13 |
|
|
|
|
|
| |
and the shipping bracket (C) from the Base (83). |
|
| 84 |
|
Attach a Wheel (84) with the Bolt and the Nut |
|
|
| |
| 2 | 81 |
| |
that you just removed. Do not overtighten the |
|
| ||
Nut; the Wheel must turn freely. Discard the |
|
| 8 | C |
shipping bracket. |
|
|
|
|
6. With the help of a second person, hold a Bolt | 6 |
|
|
|
Spacer (80) inside the lower end of the Left |
|
|
| |
|
|
|
| |
Upright (74). Insert a 3/8" x 4 1/2" Bolt (6) with a |
| 6 |
| 74 |
3/8" Star Washer (9) into the Left Upright and |
|
| ||
|
|
|
| |
the Bolt Spacer. Repeat this step with a second |
| 9 |
|
|
Bolt Spacer (80), 3/8" x 4 1/2" Bolt (6), and 3/8" |
|
|
| |
|
|
|
| |
Star Washer (9). |
| 76 |
|
|
|
|
|
| |
Orient the Left Upright (74) and the Left Upright |
| 80 |
|
|
Spacer (76) as shown. Hold the Left Upright |
|
|
| |
|
|
|
| |
Spacer and the Left Upright against the Base |
|
|
|
|
(83). Finger tighten the two 3/8" x 4 1/2" Bolts |
| 80 |
|
|
(6); do not fully tighten the Bolts yet. | 77 | 83 |
|
|
Press a Base Endcap (77) into Base (83). |
|
|
|
|
7. Attach the Latch Bracket (111) to the Base (83) | 7 |
|
|
|
with two 3/8" x 2" Bolts (4) and 3/8" Nuts (8). |
|
|
| |
|
|
|
| |
With the help of a second person, tip the tread- |
|
|
|
|
mill so that the Base (83) is flat on the floor. |
|
|
|
|
|
| 83 | 8 |
|
|
|
| 111 |
|
|
|
| 4 |
|
| 8 |
|
|
|
