TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-888-825-2588, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 8). Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. Important: The treadmill is not compatible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.

c.Check the circuit breaker located on the treadmill near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

d.Check the on/off switch located on the treadmill near the power cord. The switch must be in the on position.

PROBLEM: The power turns off during use

c

 

Tripped

Reset

d

 

On

 

Position

 

SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see c. above). If the

circuit breaker has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in.

c.Remove the key from the console. Reinsert the key fully into the console.

d.Unplug the power cord, wait for five minutes, and then plug the power cord back in.

e.Make sure that the on/off switch is in the on position.

f.If the treadmill still will not run, please call our Customer Service Department, toll-free.

PROBLEM: The displays of the console do not function properly

 

 

SOLUTION: a. Remove the key from the console and unplug the

a

48

power cord. Remove the indicated Screws (48) from

the Hood (62). Carefully rotate and lift the Hood.

 

62

 

48

 

 

Locate the Reed Switch (37) and the Magnet (31) on

1/8”

 

the left side of the Pulley (30). Turn the Pulley until

 

the Magnet is aligned with the Reed Switch. Make

93

30

sure that the gap between the Magnet and the

37

31

Reed Switch is about 1/8”. If necessary, loosen the

 

 

 

Screw (93) and move the Reed Switch slightly.

 

 

Retighten the Screw. Re-attach the hood, and run the

Top

 

treadmill for a few minutes to check for a correct

View

 

speed reading.

 

 

26

Page 25 Page 27
Page 26
Image 26
NordicTrack NTTL25512 manual Troubleshooting, Problem The power turns off during use, Top, View
Page 25 Page 27

NTTL25512 specifications

The NordicTrack NTTL25512 treadmill is an exceptional fitness machine that brings the gym experience right into your home. Designed for both casual walkers and serious runners, it merges cutting-edge technology with user-friendly features to provide an engaging workout.

One of the most notable features of the NTTL25512 is its 3.0 CHP (continuous horsepower) DurX Commercial Plus motor. This powerful motor allows for smooth and consistent performance, supporting various workout intensities, from leisurely strolls to high-intensity sprints. The motor is built to endure extensive usage, making it a reliable choice for home gym enthusiasts.

The treadmill boasts a spacious running surface with a 20" x 60" area that accommodates users of all sizes. The generous dimensions provide ample room for running, allowing for a more natural gait. Additionally, the FlexSelect cushioning system helps to reduce joint stress by providing a soft landing surface while still offering enough firmness for an authentic outdoor running experience.

Equipped with a 10-inch full-color touchscreen display, the NTTL25512 enhances workout engagement through interactive features. Users can navigate through various workout programs and track their fitness stats, including speed, distance, time, and calories burned. The treadmill includes a wide range of built-in workout programs, targeting different fitness goals, from weight loss to endurance training.

One of the standout technologies integrated into the NTTL25512 is iFit compatibility. Subscribers to iFit can access an extensive library of workouts designed by certified trainers. The platform also offers Google Maps integration, allowing users to run virtual trails from around the world, keeping workouts fresh and exciting. This feature syncs with the treadmill to automatically adjust the incline and speed, mimicking real-world terrain.

The treadmill provides an incline range of 0% to 12%, helping users to simulate hill workouts which are effective for building strength and increasing calorie burn. The quick incline and decline control buttons on the console allow for instant adjustments.

For added convenience, the NTTL25512 features Bluetooth connectivity, allowing users to pair their devices and enjoy their favorite music or listen to coaching cues through built-in speakers. Additionally, the treadmill includes a spacious tablet holder, ensuring that users can enjoy entertainment while they work out.

In summary, the NordicTrack NTTL25512 treadmill combines power, technology, and comfort. With its robust motor, spacious running surface, iFit compatibility, and advanced cushioning system, it stands out as a top choice for anyone serious about enhancing their home fitness routine. Whether you’re a beginner or an experienced athlete, this treadmill has the features and technologies necessary to help you achieve your fitness goals.
Top Page Image Contents