(1)FIELD CONVERSION OF A NHDI/SC SERIES HUMIDIFIER WITH NORTEC LINKS 2
BACNET, LONWORKS AND N2 MODULES:
Router Power |
| LINKS 2 | ||
| Module | |||
|
|
|
| |
Supply |
| |||
|
| |||
OnLine
Module
LAN Router or Switch 
(BACnet/IP)
Figure 1. Component Identification
A.MOUNT THE LINKS 2 ASSEMBLY
(1)Refer to Figure 2 for the mounting location of the Nortec LINKS 2 Bracket on the NHDI or NHSC unit. If pilot holes for the mounting screws are not already present on the humidifier frame follow steps 2 and 3. If pilot holes are present then disregard steps 2 and 3.
(2)Using the bracket assembly as a template, mark locations of pilot holes on the NHDI/SC humidifier cabinetry.
(3)Using 1/8” drill bit, drill pilot holes for the bracket mounting screws.
(4)Install the bracket assembly using the provided
Page 2
