■Projection
Front: Projector is in front of the screen.
Front/Ceiling: Projector is in front of the screen, mounted
Rear: Projector is behind the screen.
Rear/Ceiling: Projector is behind the screen, mounted
To change from Front to Front/Ceiling or Rear to
Rear/Ceiling, press and hold the A/V Mute button on the remote control for five seconds.
■Operation
Direct Power On: When this feature is enabled, projection starts as soon as you plug in the power cord. You don’t have to press the P Power button.
Sleep Mode: When enabled, the projector turns off the lamp if it has not received any input signals for a period of time (as defined in the Sleep Mode Time setting).
Sleep Mode Time: When Sleep Mode is on, you can set the period of time before the projector turns off automatically, from 1 to 30 minutes.
Lens Cover Timer: This feature is enabled by default to turn the power off automatically when the A/V Mute slide is closed for more than 30 minutes.
High Altitude Mode: When using the projector at an altitude above 4,921 feet (1,500 meters), turn this setting on to ensure that the internal temperature of the projector is regulated properly. Turn this setting off for lower elevations.
■Standby Mode
Select Network On to allow the projector to be monitored over a network when the projector is in standby mode (the P Power light is orange).
■Language
Select the language to be used for the projector menus.
4.When you’re finished, press Esc or Menu.
note
When Direct Power On is turned on, press the
PPower button to turn the projector off, wait until the PPower light turns a steady orange, then unplug the power cord.