Nortel Networks m7310 Making and answering calls

Page 2 Enterprise Edge M7310 User Card

Making and answering calls

Answering calls Answering calls using the handset

When your telephone rings, or º flashes beside an Intercom or line button:

1. Lift the handset.

Press the button beside the flashing º before lifting the handset.

Answering calls using Handsfree

When your telephone rings, or º flashes beside an Intercom or line button:

1. Press ©.

Making calls Depending upon the dialing mode programmed on your telephone, you may

have to lift the handset before making a call.

¬External calls using numbered line buttons

1. If you do not have an external Prime line, press a line button.

2. Dial your call.

∆External calls using Intercom buttons

1. Lift the handset.

2. If º appears beside an Intercom button, enter a line pool access code.

Press an Intercom button without º, then enter a line pool access code.

3. When you hear external dial tone, dial your call.

Internal calls using Intercom buttons

1. If you do not have an internal Prime line, press ∆.

2. Dial your call.

Note: Line pool access codes and extension numbers are supplied by

your System Administrator.

Making calls using Handsfree

1. Press © instead of lifting the handset.

˙Holding Calls

1. Press ˙. The º flashes beside the line on hold.

2. Press the line button with the flashing º to return to the call.

Automatic ho ld

Calls are put on hold automatically when you switch from one line to another.

Exclusive hold

Use Exclusive Hold (ƒ˙) to keep a call on hold so that it

can be retrieved only at your telephone.

Switching between Handsfree and handset

2. Pick up the handset to switch back.

Using Mute