There are four 100BASE-FX MDA models:
•400-2FX MDA
Not supported on the Accelar Series Modules (see Table 2 on page 2)
•8100-2FX MDA
Supports BayStack 350/450, BayStack 410, and Accelar Series Modules (see Table 2 on page 2)
The 400-2FX MDA and the 8100-2FX MDA (Figure 2) each use two longwave 1300 nm SC connectors to attach devices over 62.5/125 micron multimode fiber optic cable.
•400-4FX MDA
Not supported on the Accelar Series Modules (see Table 2 on page 2)
•8100-4FX MDA
Supports BayStack 350/450, BayStack 410, and Accelar Series Modules (see Table 2 on page 2)
The 400-4FX MDA and the 8100-4FX MDA (Figure 3) each use four longwave 1300 nm MT-RJ connectors to attach devices over 62.5/125 micron multimode fiber optic cable.
The 100BASE-FX MDA models conform to the IEEE 802.3u 100BASE-FX standard and can be used to attach fiber-based 100 Mb/s connections to other compatible Fast Ethernet devices. Single-mode fiber cable is not supported.
8
