Nortel Networks NN42020-123 manual Writing a client to perform some specific OPI operations

Models: NN42020-123

1 58
Download 58 pages 13.36 Kb
Page 21
Image 21
Writing a client to perform some specific OPI operations

Copyright © Nortel Networks Limited 2006

21

The Client classes are now ready to be used.

Writing a client to perform some specific OPI operations

Once the OPI stubs have been generated and compiled, the real OPI client can be constructed and OPI method calls can be made. To accomplish this, the following steps must be performed in code.

Procedure 5 Writing a client to perform some specific OP operations

1Instantiate the OPIServiceLocator.

2Instantiate a URL object that will point to the Provisioning Server location and the OPI service running on it.

3Invoke the getOPI call on the OPIServiceLocator instance with the URL created in step 2. This action will result in an instance of the OPI object, which can be used to make OPI calls.

4Set the authentication information on the OPI object from step 3. Peform this action by down casting the OPI object as a org.apache.axis.client.Stub object.

Open Provisioning Interface Reference Guide

Page 21
Image 21
Nortel Networks NN42020-123 manual Writing a client to perform some specific OPI operations