North Star M157304E Maintenance Instructions, Recommended Service Parts List, Maintenance Mode

Models: M157304E

1 19
Download 19 pages 15.86 Kb
Page 10
Image 10
Maintenance Instructions

WARNING: Do not alter the unloader valve’s maximum pressure. Excess pressures could cause serious injury and/or pump damage. Any alteration other than turning the adjustment knob will void your warranty.

To Stop

1.If detergents were used, draw clean water through the detergent inlet line to purge detergent. Failure to do so may clog the chemical injector.

2.Turn the pump switch OFF.

3.Turn OFF the water supply.

4.Squeeze the trigger to relieve the system pressure.

Maintenance Instructions

WARNING: Unauthorized machine modification or use of non-approved replacement parts may cause personal injury and/or property damage and will void the manufacturer warranty.

All mechanical equipment, no matter how well designed, will need repairs. A North Star pressure washer is no exception. At times, a North Star pressure washer may be inoperable because repairs are required. North Star Customer Service will assist in these repairs as needed, but if an inoperable pressure washer creates a major expense to your business then we strongly recommend the following:

1.Have someone on staff who is trained in the operation of the pressure washer and is capable of making minor repairs and performing all preventative maintenance procedures as outlined in the provided manuals.

2.Keep a stock of recommended service parts for maintenance and minor repairs.

Recommended Service Parts List

Following is a list of the service parts we recommend stocking.

Description

Part Number

Nozzle 5 Pack (157303)

778197

Nozzle 5 Pack (157304)

778281

O-Ring for Hose

30784

Pump Oil

4043

Chemical Injector

31935

Spray Gun

319153

50’ Pressure Hose

32276

Maintenance Mode

Before performing any maintenance on the pressure washer, it must be placed in maintenance mode.

A.) Turn off water supply B.) Bleed water from system

C.) Disconnect power by unplugging power cord and/or flipping circuit breaker OFF.

Maintenance Schedule

What to Check

When To Check

What to Do

Inlet Filter

Each Use

Clean

Hoses

Each Use

Check for Wear

Bolts

Each Use

Check for Loose

 

 

Bolts

Cleaning The Inlet Filter

WARNING: Check whether dangerous chemicals have been used, and take precautions when handling filters.

A.) Unscrew inlet filter cap

B.) Remove Inlet filter

C.) Run water though to clean filter

Checking the Hoses

WARNING: Do not use a finger or skin to check for leaks. Escaping fluid under pressure has sufficient force to penetrate the skin, causing serious injury. Do not operate the pressure washer if the hose is cracked, worn, or leaking.

A.) Check all hoses for leaks

B.) Check all hoses of worn areas

Good

Bad

Water Leak

Wire Mesh

Bad

00426

10

Page 10
Image 10
North Star M157304E Maintenance Instructions, Recommended Service Parts List, Maintenance Mode, Maintenance Schedule