For technical questions and replacement parts, please call
Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., INC. Product! For future reference, please complete the owner's record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool + Equipment strongly recommends that this machine is not modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the machine until you have first contacted Northern Tool + Equipment to determine if it can or should be performed on the product.
Before using this product, please read the following instructions carefully.
DESCRIPTION & INTENDED USE
The Northern Industrial Air Palm Sander features an advanced design with a compact structure, superior technology and substantial attack strength. This model is safe and reliable to operate while driving nails into the workpieces without a trigger. Ideal for nailing in tight corners,
TECHNICAL SPECIFICATIONS
Item | Description |
Capacity | 1 Piece |
Nail length | Up to |
Nail diameter | 5d to 70d |
Operation pressure | |
Air inlet | 1/4" NPT |
Dimension | 4" x 3" x 5 " |
Weight | 2 lbs. |
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
WORK AREA
∙Keep work area clean and well lit. Cluttered and dark work areas can cause accidents.
∙Do not use your pneumatic tool where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gasses, or dust. Pneumatic tools can create sparks, which may ignite the dust or fumes.
∙Keep children and bystanders away while operating a pneumatic tool. Distractions can cause you to lose control, so visitors should remain at a safe distance from the work area.
1 of 4
