Northland Kitchen Appliance Northland Kitchen Appliance manual Typical Control Knob

Grounding Method: This product is factory equipped with a power supply cord that has a three-pronged grounded plug. It must be plugged into a mating ground- ing type receptacle in accordance with the National Electrical Code and applicable local codes and ordi- nances (see figure 1). If the circuit does not have a grounding type receptacle, it is the responsibility and obligation of the customer to exchange the existing receptacle in accordance with the National Electrical Code and applicable local codes and ordinances. The third ground prong should not, under any circumstances, be cut or removed. All U.L. listed refrigerated products are equipped with this type of plug.

How to Operate Your Refrigerated Wine Cabinet

Setting the Control: The total available temperature range of the unit is from the low forties to the mid six- ties. The middle range on the control is approximately 55°F. The temperature can be lowered or raised by turn- ing the control clockwise or counterclockwise, respec- tively. A higher number is colder, a lower number is warmer. The "OFF" position shuts-down the refrigera- tion system only, it does not turn-off power to the unit. Figure 2 is a typical control knob representation; your graphics may vary slightly dependent upon your specific model. As with any refrigeration product, there will be a slight temperature variance at different locations within the storage compartment. Your appliance is shipped with the control set to the mid-point setting. It is recom- mended you wait 48-hours after initial loading of bottles to allow compartment temperature to stabilize prior to making control adjustments. If changes to control set- tings are desired, please wait 24-hours between adjust- ments to allow the new control settings to stabilize.

Typical Control Knob

(Your graphics and colors may vary slightly depending on your specific model.)

Figure 2 Set-Point Indicator

1 = warmest setting.

4 = mid-point setting.

7 = Coldest setting.

OFF = Refrigeration / cooling "only" turned-off.

(Unplug unit before servicing electrical components.)

Wine Bottle Storage: The slide-out shelves each hold four(4) to seven(7) standard size bottles depending on your specific model. See Figure 3 for typical recom- mended wine bottle storage configuration.

Rear Bottles (Necks Facing Front)

Front Bottles (Necks Facing Rear)

Figure 3

On the full-height built-in models shelf locations are pro- vided with additional spacing to accommodate storage of large magnum style bottles.

On the 24" wide under counter model a cradle is provid- ed on the floor of the unit for large bottle storage. For the 15" wide under counter model, large bottles can be accommodated by removing the shelf directly above the desired shelf storage location. This shelf removal method can also be used on the 24" under counter model if additional large bottle storage is required.

For convenience, keep your frequently used wines posi- tioned with bottoms towards the door so the labels will be readily visible when the racks are slid-out. Place wines for aging or longer term storage in the rear rack positions.

Typical Wine Bottle Storage Capacity

15” Wide Under Counter	24” Wide Under Counter
24 Bottles	54 Bottles
18” Wide Built-In	24” Wide Built-In
75 Bottles	105 Bottles

2