GPS Alert Options Alert | NorthStar Navigation 710 VHF specification

2-5-7 GPS Alert Options (ALERT)

The GPS alert is usually set to ON (on) so that if the GPS navigation receiver is disconnected, the alarm sounds.

GPS/DATA

LL DISPLY COG/SOG

>GPS ALERT

GPS ALERT

>ON OFF

1.Select GPS/DATA, then SETTING.

2.Select GPS ALERT.

3.Select ON (on) or OFF (oﬀ ) as desired.

2-6 GPS Simulator (SIMULATOR)

The GPS Simulator is set to OFF whenever the radio is turned ON or whenever real GPS data is available through the COM port. However, if you want to test it, turn it on.

MENU SELECT

DSC SETUP

RADIO SETUP

> GPS SIM

1.Select GPS SIM, then select ON (on) or OFF (oﬀ ) as desired.

Whenever the GPS Simulator is turned ON (on), simulated Speed Over Ground (SOG), Course Over Ground (COG), and LL position appear on the screen. This data is updated automatically during the simulation.

It is not possible to send a DSC transmission when in Simulator mode.

2-7 Reset to Factory Defaults (RESET)

Use this to return every setting to the factory defaults except all MMSID settings and the entries in your buddy list.

MENU SELECT

RADIO SETUP

GPS SIM

> RESET

RESET RADIO

ARE YOU SURE

>YES NO

1.Select RESET. The radio asks for confirmation.

2.Select YES to reset the radio and return to the menu.

The Call Logs will be cleared but the BUDDY LIST will be saved. The receiver and transmitter factory settings are restored to default conditions.

Northtstar Explorer VHF Series: 710US, 710EU Operation and Installation Manual

17

Image 17

NorthStar Navigation 710 VHF GPS Alert Options Alert, GPS Simulator Simulator, Reset to Factory Defaults Reset

Contents

Explorer 710 VHF Important Safety Information Contents RF Emissions Notice Customizing your Northstar VHF Radio FeaturesGeneral Information LCD Symbols and Meanings How to Display and Navigate MenusHow to Enter Alphanumeric Data WX ALT HI LOBusy PRI SQL Basic Operation and Key FunctionsVOL/PWR UIC 3CHDIM Scan ESC ENTCALL/MENU Menu Radio Menu Options Menu Edit an Entry Maintain Your Buddy List Buddy List Set Distance Sensitivity Local or Distance Sensitivity LOCAL/DISTSet Local Sensitivity Backlighting Backlight and Contrast Contrast Set the Contrast Level Set the Backlighting LevelGPS Data and Time GPS/DATA Manually Enter Position and UTC Time Manual Time Offset GPS/DATA Manual SettingLocal Time Time Offset Course & Speed Display Options COG/SOG Time Display Options Time DisplayPosition Display Options LL display GPS Alert Options Alert Reset to Factory Defaults ResetGPS Simulator Simulator Select GPS SIM, then select on on or OFF oﬀ as desired Channel Names CH Name Radio Setup Menu Radio SetupRadio Setup Menu Radio Setup Set the Priority Channel Watch Mode Ring & Beep Volume Ring VOL and Beep VOLSelect Radio SETUP, then INT Speaker Internal Speaker Connections INT Speaker Radio Setup INT Speaker Watch Mode WX Alert OFF Select Radio SETUP, then WX AlertWeather Alert Wx Alert Nmea protocol COM Port DSC Setup Menu Options DSC Setup Menu DSC SetupEnter Your User Mmsid User Mmsid Mmsid Create a Group Group Setup Maintain Your Groups Group SetupSelect DSC SETUP, then Group Setup Edit Group Name Details Response to Individual Calls Indiv Reply Delete a GroupAtis Mmsid & Atis Functionality Enter or Edit Your Atis Mmsid DSC Setup Indiv Reply Atis Mmsid Atis Func On OFF Enable Atis Functionality Atis FuncDSC Setup Group Setup Indiv Reply DSC Func On OFF DSC functionality options DSC Func DSC Func Manual LL Reply OFF DSC Setup LL ReplyIndiv Reply Auto Sending DSC calls Sending and Receiving DSC Calls Acknowledgement of an Individual Incoming Call Indiv Make a Routine Call IndividualRetrying a Routine Call Call All Ships ALL Ships Call a Group Group Set the channel and continue as explained in Section Call using the Call Log Call LOGCall using the Distress Log Dist LOG Receiving an All Ships Call ALL Ships Request the LL Position of a Buddy LL RequestReceiving DSC Calls Receiving a Polled Position Call Position Receiving a Group Call GroupReceiving a Geographic Call Geograph Open the red cover labelled Distress Distress CallsSending a Distress Call Distress Acknowledgement distress ack or Relay Receiving a Distress Call DistressRCV Distress Flooding ESC Exit RCV Distress Northstar VHF 710 US.EU Appendix a Technical Specifications Receiver TransmitterFrequency 156.025 163.275 MHz UV distant / 2.5 uV local Appendix B Troubleshooting International EU-DSC on Appendix C VHF Marine Channel Charts Special Notes on International Channel Useage Page USA Channel Chart Send Receive Traffic Type Ship Name TAG Canadian Weather Channel Canada WX Noaa Weather Channel Noaa WX Canadian CG Canada Channel Chart Pleasure Ship Ship Weather Digital selective calling for distress EU Inland Waterway Channels Country Specific AIS 156.85162 Page Special Channels Appendix D Mmsid and License Information Installation Section Checklist pictured over Installation Options Checklist middle picture opposite Gimbal Installation Changing the Viewing Angle Recessed Installation picture belowConnecting the Radio Cable Pinout Color Wiring DetailsConnect the Radio Cables Rear view of base unit User Mmsid 800.628.4487 978.897.6600978.897.7241 PO Box