Nostalgia Electrics CCP-510 BLK manual USING YOUR CIRCUS CART POPCORN MAKER Continued, Cleaning

8

USING YOUR CIRCUS CART POPCORN MAKER™ (Continued)

Tip the kettle with the red knob to remove the pieces of popcorn. Once the popcorn has stopped popping.

D

When removing or replacing the kettle, make sure

It is properly seated in the kettle brackets.

E

Make sure the unit is unplugged before cleaning. Unplug the outer plug to the outlet as well as the kettle motor plug inside the unit. (See photo item C, item 4 on page 3 for location of motor plug).

See instructions on page 5 for kettle cleaning.

Use a slightly damp, non-abrasive sponge or non-abrasive towel to wipe clean the inside and outside of the unit, then wipe with a non-abrasive dry towel to dry.

NOTE: Never immerse the kettle unit in any liquid – simply wipe clean with a damp cloth. Never place any parts in dishwasher – always wash by hand.

Pull out the kernel catching tray and empty. Replace tray.

Wipe out with a damp cloth and dry.

F

CLEANING

1.Switch “OFF” the unit.

2.Pull up the cover and by turning the handle of the bow anti-clockwise, discard any unpopped popcorn kernels and oil remaining in the kettle.

3.Wipe out the kettle with a disposable clean cloth. The kettle should be clean but “Seasoned” and ready for the next use.