ENGLISH 3
Your RETRO HOT DOG ROLLER ™ requires little assembly.
Place roller assembly in unit, making sure the pin fits correct ly into the fitting on the left
hand side of the base interior. IMPORTANT: Notice the sha pe of the receptacle in the
base and the endpin on the roller assembly (see Illustratio n A below). They are fitted
to work together. DO NOT force the pin into the receptacl e or it will strip and then
cannot control the roller action (see Illustrations A an d B below).
Fit the four canopy poles into the holes in each corner of th e unit. Insert the drip tray
in the slot at the back of the unit. (See illustration C b elow).
Attach the canopy top to the poles.
Do not attempt to place roller assembly on base or remove from base while motor is
on.
IMPORTANT Notice the shape of the receptacle in the base, and the endpin on the roller
assembly. They are fitted to work together.
A B
c
NOTE: To prolong the life of your RETRO HOT DOG RO LLER™, follow the cleaning
instructions provided on page 4 after every use and mak e sure the roller assembly is fitted
properly in the base unit as shown above. DO NOT forc e it or it will strip the fitting and the
rollers will not be able to be controlled for proper rotating.
Pin on Roller
Assembly
Receptacle