3.Use the four supplied mounting screws to attach the antenna to the mounting surface. The
NovAtel recommends
2
1
3 4 5
Ref. # Description
1Antenna
2Countersink screws
3Mounting surface
4
5
4.Remove the dust cap from the antenna’s TNC connector.
5.Attach the coaxial cable’s male TNC connector to the antenna’s TNC connector.
Ref.# Description
1Mounted antenna
2Mounting surface
3TNC connector
4Coaxial cable
6.Attach the other end of the coaxial cable to the antenna input port on the receiving device. The receiving device must be equipped to provide power as detailed in the SPECIFICATIONS section of this guide. All NovAtel GPS receivers provide the necessary power through the antenna RF connectors.
2