DESCRIPTION CDN-20SREMOTE FEATURES
1.PROGRAM - Depress this button and the unit will stop and the program indicator will light. Select each track to be programmed and press the PROGRAM button between selections. You can program up to 20 tracks. Press PLAY to start the program. To exit and erase program hold the program button down for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the power.
2.CONT/SING - Will cause just a single track to play or all tracks in order by pressing once or twice.
3.LCD DISPLAY - Indicates all the functions, as they are occurring, with the CD. These functions are explained in the next section.
4.TIME (Time Button) - The TIME button switches the time display between elapsed playing time and remaining time on the track.
5.OPEN/CLOSE (Disc Tray Open/Close) - Press to load or eject the disc. Each press will open or close the disc tray on the transport. NOTE: Tray will not open unless the disc has been paused.
6.TRACK (Track Buttons) - These buttons are used to select the track to be played.
7.Track 10 Button - This button is for quickly advancing to higher tracks on a CD.
8.PITCH (Pitch Button) - This button activates the Pitch Slider (14).
9.PITCH BEND (Pitch Bend Button) - When each of the two CD players is playing a CD, the pitch bend function allows the positioning of the bass beats to be matched after the pitch of each disc is matched. Either player can “catch up” or “fall back” to match the other player. The pitch will automatically rise while the + button is pressed (allowing “catch up”) and return to the original pitch when the button is released. The pitch will automatically drop while the button is pressed (allowing “fall back”) and return to
the original pitch when the button is released. By changing the pitch of one disc with respect to the other in this way the beats can be matched.
10.SEARCH – Depress and hold the right button and the CD will rapidly advance forward through the music. The longer you hold it the faster it searches. The left button searches backward through music already played. When the CD is paused the cue point can be adjusted by tapping either button.
11.LOOP - Used for repeating sections in the music. This is not a seamless function.
12.CUE - Pressing the CUE button during play provides a return to the position at which play was started. If PAUSE is used before CUE, that will become the cue point. Alternately pressing the PLAY button and the CUE button allows the CD to be played from the same position any number of times. The CUE LED will light up from the time the CUE button is pressed until the CD has reset to the position at which play was started. Steady lighting of this LED indicates the ready condition.
13.START/PAUSE (Play/Pause Button) - Each press of the Play/Pause Button causes the operation to change from play to pause or from pause to play.
14.PITCH SLIDER - The pitch can be changed up to +/- 12% by pressing the PITCH button so the PITCH LED is lit, then moving the sliding fader. The pitch will not be changed if the PITCH LED is off.
15.RELAY/FADER START – By pressing this button the player will alternate playing from side to side or can be activated by a mixer containing the fader start feature. In continuous mode the relay feature will have the player complete playing the full CD then switch to the other side. In single mode the player will alternate after each track. If fader start cables are attached to a fader start mixer, then, the actions of the mixer can control to CD player. Instructions for this should be found in the mixer manual. Both functions are active simultaneously.
| - The Leader in DJ Technology |
|
©2000 Numark Industries | - 6 - | http://www.numark.com |
