Safety Instructions

CDN25

a)Read Instructions - All the safety and operating instructions should be read before this product is connected and used.

b)Retain Instructions - The safety and operating instructions should be kept for future reference.

c)Heed Warnings - All warnings on this product and in these operating instructions should be followed.

d)Follow Instructions - All operating and other instructions should be followed.

e)Placement – place the unit in a clean dry location.

f)Water and Moisture - This product should be kept away from direct contact with liquids. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

g)Temperature- Avoid placing this product to close to any high heat sources such as radiators. Do not use this unit at temperatures below 41°F/5°C or higher than 95°F/35°C.

h)Ventilation - The appliance should be situated so that it’s location or position does not interfere with it’s proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation opening; or, placed in a built-installation, such as bookcase or cabinet that may impede the flow of air through the ventilation openings.

i)Power Sources - This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.

j)Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them. When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord.

k)Object and Liquid Entry - Take care that objects do not fall into and that liquids are not spilled into the inside of the mixer.

l)Cleaning – The appliance should be cleaned only as recommended by the manufacturer. Do not use chemical solvents to clean the unit.

m)Non-use Periods – The power cord of the appliance should be unplugged from the outlet when left unused for long periods of time.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE ANY COVER. NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL ONLY.

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance.

CAUTION

FOR USA & CANADIAN MODELS ONLY

TO PREVENT ELECTRIC SHOCK DO NOT USE

THIS (POLARIZED) PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments.

n)Damage Requiring Service - Only qualified personnel should service this product. If you have any questions about service please contact Numark at the number(s) shown on the back cover of this manual.

o)Grounding or Polarization - Precautions should be taken so that the grounding or polarization means built into the CD player is not defeated.

p)Internal/External Voltage Selectors - Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.

q)Carts and Stands －The appliance should be used only with a cart or stand that is recommended by the manufacturer of the cart or stand. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

SERVICE INSTRUCTIONS

•Disconnect power cord before servicing

•Replace critical components only with factory parts or recommended equivalents

•For AC line powered units - Before returning repaired unit to user, use an ohmmeter to measure from both AC plug blades to all exposed metallic parts. The resistance should be no more than 100,000ohms.

NOTICE CONCERNING FCC REGULATIONS

This equipment generates and uses radio frequency energy and may cause interference to radio and television reception if you do not operate it in strict accordance with the procedures detailed in this OPERATING MANUAL. This unit complies with Class B computing device rules in accordance with the specifications in Sub-part J or Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. There is no guarantee, however, that interference will not occur in a particular installation. If the unit does cause interference to any radio or television reception, try to reduce it by one or more of the following means:

a)Reposition the other unit and/or its antennae

b)Move this unit

c)Move this unit and the other unit(s) further apart

d)Plug this unit into a different AC outlet so that it is on a different circuit from the other equipment.

This note is in accordance with Section 15.838 of the FCC Rules.

This unit does not exceed the Class B limits for radio noise emission from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications.

DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK

FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM.

USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE

DOUBLE INSULATED - When servicing use only identical replacement parts

For 220-volt use in USA, use NEMA style 220-volt plug. For other countries use proper plug for local outlet.

©2001 Numark Industries	- The Leader in DJ Technology	http://www.numark.com
	- 2 -

CDN25 specifications

Numark Industries CDN25 is a professional dual CD player designed for DJs seeking reliability and user-friendly functionality. Known for its robust build and impressive feature set, the CDN25 has become a staple in clubs and mobile setups alike.

One of the standout features of the CDN25 is its dual-CD capability, allowing DJs to load and cue two separate CDs simultaneously. This is a significant advantage in a live performance setting, as it provides seamless transitions between tracks. DJs can easily switch between two playlists without interruption, enhancing their overall mixing experience.

The CDN25 also includes a range of playback options. It supports various formats, including CD-R and CD-RW, giving DJs the flexibility to use personalized mixes. With its pitch bend control and adjustable pitch ranges, the CDN25 enables precise tempo adjustments, making it easier to sync tracks during live performances.

Equipped with an intuitive layout, the CDN25 features a backlit LCD display that provides clear visual feedback, essential for quick song selection and monitoring. The controls are strategically placed, facilitating easy navigation through tracks and settings, which is vital during an energetic set.

In terms of connectivity, the CDN25 offers a plethora of outputs, including balanced XLR and unbalanced RCA outputs, ensuring compatibility with various sound systems. Additionally, it features headphone outputs with a dedicated volume control for pre-listening, allowing the DJ to cue the next track discreetly.

The CDN25 also integrates advanced technologies to enhance the DJ experience. Its seamless looping feature allows DJs to create exciting breakpoints or extend certain sections of a song, while the instant start function provides immediate playback with minimal delay.

Durability is another hallmark of the CDN25. Built to withstand the rigors of constant transportation and performance, it boasts a robust chassis designed to endure the demanding environments DJs often face.

In summary, the Numark Industries CDN25 stands out with its dual CD player functionality, comprehensive playback options, intuitive interface, and resilient build. As a reliable companion for both novice and professional DJs, the CDN25 consistently delivers performance and flexibility, making it a preferred choice in the DJ equipment market.

Numark Industries CDN25 manual Safety Instructions

Models: CDN25