DM1001X/DM1002X

DM1001X/DM1002X FACE PANEL DIAGRAM...

GUIDED TOUR OF FEATURES AND OPERATING INSTRUCTIONS...

If this is your first mixer, please read this entire manual before you begin operation. If you are an experienced DJ we highly recommend reading the manual so you may fully appreciate this newer technology. This mixer can be 10” rack-mounted or used as a free-standing unit. Keep in mind that there are a few features you may never have seen before in a mixer of this type that you will need to read about.

INSTALLATION AND OPERATION

Study the Connections Diagram on page 13. First, connect all stereo input sources. Next connect your microphone(s) and monitor headphones. Make sure all faders are at "zero" and the unit is off. Finally, connect the stereo outputs to the power amplifier(s) and/or audio sources. Plug the mixer into AC power. Now you are ready to switch it on.

CHANNEL FEATURES

1.Channel Input Toggle Switches select which source will be active on that channel based on what you have connected to the rear panel input section.

2.The Input Faders are low-noise, low-impedance, high-quality, smooth Alps™ faders. These control individual source levels in the mix.

3.Treble, Middle, and Bass Controls are for setting appropriate equalized levels for the music you are playing. When turned all the way left they “CUT” the signal by -30dB for special effects mixing.

4.Gain Controls are for accurately matching audio input levels of the channels.

5.Microphone Controls are used to adjust input level and equalization level for your mic input. The talkover feature will bring down the level of the music while keeping the mic level up. This allows you to talk over the music.

6.Microphone Jack for a 1/4” Microphone connector.

7.KILL buttons (DM1002X only) are for instantly eliminating the chosen frequency area. This way you can mix the bass of one song with the treble and middle of another.

 

 

17

4

 

 

 

16

 

3

 

 

 

1

11

5

2

12

 

 

13

 

 

7

9

15

7

 

8

10

6

 

14

CROSSFADER SECTION

8.The Replaceable Crossfader achieves clean segues between the two selected input channels. "Hard left" selects Channel 1. "Hard right" selects the Channel 2. With the crossfader centered both channels are live. Use the crossfader for fast and seamless segues from one selected channel to the other.

N o t e : The crossfader is user replaceable in case of failure. Simply unscrew the two large screws which hold it in place, lift it out and disconnect it’s cable. Re-attach the new crossfader and screw the mounting plate back onto the unit - you’re back in business!

9.The Crossfader Control toggle allows the DJ to reverse the direction of the crossfader or turn it off. By reversing direction Channel 2 will be on the left and Channel 1 will be on the right.

10.Transform Buttons are for quickly reversing the crossfader direction in order to create various special effects.

Numark - The Proven Leader in DJ Technology

©1998 Numark Industries

6

http://www.numark.com

Page 6
Image 6
Numark Industries DM1001X/DM1002X Face Panel Diagram, Installation and Operation, Channel Features, Crossfader Section

DM1001X, DM1002X specifications

Numark Industries has long been recognized in the audio equipment sector for creating exceptional DJ gear, and their DM series stands out as an industry favorite. Among these products, the DM1002X and DM1001X offer valuable features that cater to both novice and professional DJs.

The Numark DM1002X is particularly notable for its versatility and performance. This two-channel mixer is equipped with a professional design that incorporates high-quality components, ensuring durability and reliability during live performances. One of its standout features is the built-in digital effects processor, which provides a variety of effects such as echo, reverb, and flanger, allowing DJs to enhance their mixes creatively.

Additionally, the DM1002X boasts a 3-band equalizer on each channel, enabling precise audio manipulation to achieve the desired sound. The mixer's faders are smooth and long-lasting, offering fine control over transitions. The dual headphone outputs ensure that DJs can monitor their mixes effectively, aiding in seamless transitions for the audience.

On the other hand, the DM1001X is a more compact version that shares some features with its counterpart while being more accessible for beginner DJs and smaller setups. It retains the essential functionalities of a mixing console, including a two-channel design, a 2-band EQ per channel, and a straightforward layout that is user-friendly and intuitive.

Both mixers utilize Numark's innovative technologies to optimize sound quality and performance. They include high-quality phono preamps that support vinyl players, making them excellent choices for DJs who enjoy spinning records. Furthermore, the DM1002X features RCA master outputs, providing flexibility when connecting to speakers or recording devices.

Additional input options, including microphone and auxiliary inputs, make these mixers ideal for diverse performance requirements, from club gigs to mobile events. Their lightweight construction ensures easy transport, which is crucial for DJs on the go.

In summary, the Numark DM1002X and DM1001X mixers are excellent choices for DJs of all levels. With robust features, intuitive controls, and high-quality sound, these mixers represent the brand’s commitment to delivering outstanding performance and reliability. Whether in a professional club environment or a private event, these devices ensure that music takes center stage, captivating audiences with every performance.