QUICK SETUP

1.Make sure all items listed on the front of this guide are included in the box.

2.READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.

3.Study this setup diagram.

4.Place mix station in an appropriate position for operation.

5.Make sure all devices are turned off and all faders and gain knobs are set to “zero”

6.Connect all stereo input sources as indicated in the diagram.

7.Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.

8.Plug all devices into AC power.

9.Switch everything on in the following order.

audio input sources (i.e. turntables or CD players)

KMX02

last, any amplifiers or output devices

10.When turning off, always reverse this operation by,

turning off amplifiers

KMX02

last, any input devices

11.Go to http://www.numark.com for product registration.

More information about this product

may be found at

http://www.numark.com

2

Page 2
Image 2
Numark Industries KMX02 quick start Quick Setup, Read Safety Instruction Booklet Before Using the Product